 |
|
 |
 |
|
|
D-7590 |
|
 |
Home
|
D-7590
Hydro-Fused®/Nonasbestos Gasket Material
|
|
|
| D-7590 is a highly compressible, chemically resistant gasket material that is utilized as a filler material in PTFE enveloped, and metal-jacketed gaskets. It is intended for applications with maximum continuous operating temperatures up to 260oC (500oF).
|
|
|
 |
|
Density, g/cc(lb/cu.ft) |
0.565 (35.3) (min.) |
ASTM F 1315 |
|
Compressibility, % (at 34.5MPa) |
30 - 50 |
ASTM F 36 |
|
Recovery, % |
15 (min.) |
ASTM F 36 |
|
Tensile Strength, AMD, MPa(psi) |
3.45 (500) |
ASTM F 152 |
|
Fluid Resistance, 10% Sulfuric Acid (at 23oC) |
|
ASTM F 146 |
| Change in Compressibility, % |
|
60 (max.) |
|
| Change in Recovery, % |
|
15 (max.) |
|
|
Fluid Resistance, 5% Sodium Hydroxide (at 23oC) |
|
ASTM F 146 |
| Change in Compressibility, % |
|
60 (max.) |
|
| Change in Recovery, % |
|
15 (max.) |
|
|
Fluid Resistance, IRM903 Oil |
|
ASTM F 146 |
| Change in Tensile Strength, % |
|
20 (max.) |
|
| Change in Thickness, % |
|
10 (max.) |
|
| Change in Weight, % |
|
100 (max.) |
|
| Change in Compressibility, % |
|
50 (max.) |
|
|
Fluid Resistance, Fuel B |
|
ASTM F 146 |
| Change in Thickness, % |
|
10 (max.) |
|
| Change in Weight, % |
|
80 (max.) |
|
|
|
|
| Specification values determined by the test methods required for ASTM F-104, Type 7 materials. |
|
|
|
Hydro-Fused, MicroPore, Pro-Formance, Syntheseal, Thermo-Tork, Select-a-Seal and Voltoid are registered trademarks of Interface Solutions, Inc.
WARNING: The performance data provided herein represent typical values. This data sheet is not intended to be used as a purchase specification and does not imply suitability for use in a specific application. Your specific application should not be undertaken without independent study and evaluation for suitability. Failure to select proper sealing products may result in either property damage or personal injury. For specific application recommendations, contact Interface Sealing Solutions.
INTERFACE SEALING SOLUTIONS EXPRESSLY DISCLAIMS ALL WARRANTIES EITHER EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL ISI BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THE INFORMATION CONTAINED IN ITS SPECIFICATION DATA SHEETS, ITS PRODUCTS OR THEIR FUTURE USE BY YOU OR ANY OTHER PERSON OR ENTITY.
|
|
| |
Interface Sealing Solutions,
22260 Haggerty Road, Suite 200
Northville, MI 48167
|
|
Tel: (248) 596-2800
Fax: (248) 596-2880
|
|
|
Previous Revision Date: 10-12-2005
Latest Revision Date: 12-14-2005
|
|
 |
 |
|
|
|
