 |
|
 |
 |
|
|
SAS-821 |
|
 |
Home
|
SAS-821
Select-a-Seal®/Rubber Edged Composite Gasket
|
|
|
| SAS-821 combines a super-duty fiber carrier with a styrene butadiene rubber sealing bead. It is used for sealing water and coolant applications that require resistance to high internal pressures or high compression and/or shear forces. Typical applications include front covers, oil cooler housings, and water manifolds, with continuous service temperatures up to 135oC (275oF).
|
|
|
 |
|
Carrier Material |
SAS-8 |
|
|
General Description of Carrier |
High density, fully cured nitrile butadiene and thermoset resin bound material with aramid fiber blend. |
|
|
Caliper, mm(inch) |
0.8, 1.0, 1.2, 1.6 (0.031, 0.039, 0.047, 0.062) |
ASTM F 104 |
|
Density, g/cc(lb/cu.ft) |
1.5 (93.5) (min.) |
ASTM F 1315 |
|
Compressibility, % (at 34.5MPa) |
7 - 17 |
ASTM F 36 |
|
Recovery, % |
40 (min.) |
ASTM F 36 |
|
Tensile Strength, AMD, MPa(psi) |
27.50 (3985) (min.) |
ASTM F 152 |
|
|
|
Polymer Edge |
SAS-21 |
|
|
General Description of Polymer |
Styrene Butadiene Rubber Blend, generally used for water and coolant applications. |
|
|
ASTM Classification |
M1CA503 |
ASTM D 2000 |
|
Temperature Rating, oC(oF) |
125 (257) |
ASTM D 2000 |
|
Durometer Hardness, Type A |
45 - 55 |
ASTM D 2240 |
|
Tensile Strength, Initial, MPa(psi) |
3 (435) (min.) |
ASTM D 412 |
|
Edge Height |
Specified on part drawing. |
ISI M10.4X102 |
|
|
|
| Carrier specification values determined by the test methods required for ASTM F-104, Type 7 materials. Carrier is available with release coating per ISS 123316. Carrier caliper and release coating, and polymer edge height are specified on part drawing. |
|
|
|
EnCore, Hydro-Fused, Pro-Formance, Select-a-Seal, Syntheseal, Thermo-Tork, and Voltoid are registered trademarks of Interface Solutions, Inc. MicroPore is a trademark of Interface Solutions, Inc.
WARNING: The description and performance data provided herein constitute a material specification for quality control purposes, but do not imply suitability for use in a specific application. Your specific application should not be undertaken without independent study and evaluation for suitability. Failure to select proper sealing products may result in either property damage or personal injury. For specific application recommendations, contact Interface Solutions. INTERFACE SOLUTIONS EXPRESSLY DISCLAIMS ALL WARRANTIES EITHER EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL ISI BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THE INFORMATION CONTAINED IN ITS SPECIFICATION DATA SHEETS, ITS PRODUCTS OR THEIR FUTURE USE BY YOU OR ANY THIRD PARTIES, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
| |
Interface Sealing Solutions
22260 Haggerty Road , Suite 200
Northville, MI 48167
|
|
Tel: (248) 596-2800
Fax: (248) 596-2880
|
|
|
Previous Revision Date: 12-14-2005
Latest Revision Date: 02-06-2007
|
|
 |
 |
|
|
|
