 |
|
 |
 |
|
|
CMP-4200 |
|
 |
Home
|
CMP-4200
Hydro-Fused®/Compressed
MicroPore® Gasket Material
F729190E33M9 |
|
|
| CMP-4200 is a solvent-free, high performance compressed MicroPore gasket material. It was developed for steam, water, oil, and chemical resistance in Original Equipment and Industrial applications. It has exceptional sealability, torque retention, crush and blowout resistance, and is intended for applications with short duration maximum temperatures up to 350oC (650oF).
|
|
|
 |
|
Density, g/cc(lb/cu.ft) |
1.55 (97) (min.) |
ASTM F 1315 |
|
Compressibility, % (at 34.5MPa) |
7 - 17 |
ASTM F 36 |
|
Recovery, % |
50 (min.) |
ASTM F 36 |
|
Tensile Strength, AMD, MPa(psi) |
12 (1740) (min.) |
ASTM F 152 |
|
Flexibility, Mandrel Bend, 12 X Ga. |
No Cracks |
ASTM F 147 |
|
Fluid Resistance, IRM903 Oil |
|
ASTM F 146 |
| Change in Thickness, % |
|
15 (max.) |
|
| Change in Weight, % |
|
25 (max.) |
|
| Change in Tensile Strength, % |
|
30 (max.) |
|
| Change in Compressibility, % |
|
17 (max.) |
|
|
Fluid Resistance, Fuel B |
|
ASTM F 146 |
| Change in Thickness, % |
|
15 (max.) |
|
| Change in Weight, % |
|
20 (max.) |
|
|
Binder Type |
Fully Cured Nitrile Butadiene/Styrene Butadiene Rubber Blend |
|
|
Color |
Grey |
|
|
|
|
| Specification values determined by the test methods required for ASTM F-104, Type 7 materials. |
|
|
|
EnCore, Hydro-Fused, Pro-Formance, Select-a-Seal, Syntheseal, Thermo-Tork, and Voltoid are registered trademarks of Interface Solutions, Inc. MicroPore is a trademark of Interface Solutions, Inc.
WARNING: The description and performance data provided herein constitute a material specification for quality control purposes, but do not imply suitability for use in a specific application. Your specific application should not be undertaken without independent study and evaluation for suitability. Failure to select proper sealing products may result in either property damage or personal injury. For specific application recommendations, contact Interface Solutions. INTERFACE SOLUTIONS EXPRESSLY DISCLAIMS ALL WARRANTIES EITHER EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL ISI BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THE INFORMATION CONTAINED IN ITS SPECIFICATION DATA SHEETS, ITS PRODUCTS OR THEIR FUTURE USE BY YOU OR ANY THIRD PARTIES, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
| |
Interface Sealing Solutions
22260 Haggerty Road , Suite 200
Northville, MI 48167
|
|
Tel: (248) 596-2800
Fax: (248) 596-2880
|
|
|
Previous Revision Date: 01-04-2006
Latest Revision Date: 04-25-2006
|
|
 |
 |
|
|
|
