 |
|
 |
 |
|
|
NI-2097A |
|
 |
Home
|
NI-2097A
Standard/Nonasbestos Cylinder Head Facing Material
F729190E93M9 |
|
|
| NI-2097A is a non-asbestos cylinder head facing material with inorganic fillers and fibers encapsulated by nitrile butadiene rubber binder. It is suitable for Original Equipment or Aftermarket use, combines easily on perforated metal core, and has good sealability and creep relaxation properties. |
|
|
 |
|
Density, g/cc(lb/cu.ft) |
1.22 (76) (min.) |
ASTM F 1315 |
|
Compressibility, % (at 34.5MPa) |
35 (max.) |
ASTM F 36 |
|
Recovery, % |
30 (min.) |
ASTM F 36 |
|
Tensile Strength, AMD, MPa(psi) |
3.10 (450) (min.) |
ASTM F 152 |
|
Fluid Resistance, IRM903 Oil |
|
ASTM F 146 |
| Change in Thickness, % |
|
15 (max.) |
|
| Change in Weight, % |
|
45 (max.) |
|
|
Fluid Resistance, Fuel B |
|
ASTM F 146 |
| Change in Thickness, % |
|
15 (max.) |
|
| Change in Weight, % |
|
35 (max.) |
|
|
Fluid Resistance, Glycol/Water 50/50 |
|
ASTM F 146 |
| Change in Thickness, % |
|
30 (max.) |
|
| Change in Weight, % |
|
80 (max.) |
|
|
Binder Type |
Nitrile Butadiene |
|
|
|
|
| Specification values determined by the test methods required for ASTM F-104, Type 7 materials. |
|
|
|
EnCore, Hydro-Fused, Pro-Formance, Select-a-Seal, Syntheseal, Thermo-Tork, and Voltoid are registered trademarks of Interface Solutions, Inc. MicroPore is a trademark of Interface Solutions, Inc.
WARNING: The description and performance data provided herein constitute a material specification for quality control purposes, but do not imply suitability for use in a specific application. Your specific application should not be undertaken without independent study and evaluation for suitability. Failure to select proper sealing products may result in either property damage or personal injury. For specific application recommendations, contact Interface Solutions. INTERFACE SOLUTIONS EXPRESSLY DISCLAIMS ALL WARRANTIES EITHER EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL ISI BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THE INFORMATION CONTAINED IN ITS SPECIFICATION DATA SHEETS, ITS PRODUCTS OR THEIR FUTURE USE BY YOU OR ANY THIRD PARTIES, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
| |
Interface Sealing Solutions
22260 Haggerty Road , Suite 200
Northville, MI 48167
|
|
Tel: (248) 596-2800
Fax: (248) 596-2880
|
|
|
Previous Revision Date: 09-29-2006
Latest Revision Date: 10-03-2006
|
|
 |
 |
|
|
|
