 |
|
 |
 |
|
|
TS-9003 |
|
 |
Home
|
TS-9003
Thermo-Tork/®Nonasbestos Gasket material
F729900E09M4 |
|
|
| TS-9003 is a controlled-swell gasket material with a latent cure styrene butadiene rubber binder. It is an alternative to high-swell asbestos and nonasbestos compressed sheet materials. Its latent cure binder and heat resistant fibers give it good oil sealing characteristics at low flange pressure, and it conforms well to irregular flange surfaces. It is intended for applications with short duration maximum temperatures up to 350oC (650oF).
|
|
|
 |
|
Density, g/cc(lb/cu.ft) |
1.44 (90) (min.) |
ASTM F 1315 |
|
Compressibility, % (at 34.5MPa) |
15 - 30 |
ASTM F 36 |
|
Recovery, % |
20 (min.) |
ASTM F 36 |
|
Tensile Strength, AMD, MPa(psi) |
6.90 (1000) (min.) |
ASTM F 152 |
|
Fluid Resistance, IRM903 Oil |
|
ASTM F 146 |
| Change in Thickness, % |
|
45 - 85 |
|
|
Fluid Resistance, Fuel B |
|
ASTM F 146 |
| Change in Thickness, % |
|
20 - 50 |
|
|
Binder Type |
Styrene Butadiene |
|
|
|
|
| Specification values determined by the test methods required for ASTM F-104, Type 7 materials. |
|
|
|
EnCore, Hydro-Fused, Pro-Formance, Select-a-Seal, Syntheseal, Thermo-Tork, and Voltoid are registered trademarks of Interface Solutions, Inc. MicroPore is a trademark of Interface Solutions, Inc.
WARNING: The description and performance data provided herein constitute a material specification for quality control purposes, but do not imply suitability for use in a specific application. Your specific application should not be undertaken without independent study and evaluation for suitability. Failure to select proper sealing products may result in either property damage or personal injury. For specific application recommendations, contact Interface Solutions. INTERFACE SOLUTIONS EXPRESSLY DISCLAIMS ALL WARRANTIES EITHER EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL ISI BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THE INFORMATION CONTAINED IN ITS SPECIFICATION DATA SHEETS, ITS PRODUCTS OR THEIR FUTURE USE BY YOU OR ANY THIRD PARTIES, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
| |
Interface Sealing Solutions
22260 Haggerty Road , Suite 200
Northville, MI 48167
|
|
Tel: (248) 596-2800
Fax: (248) 596-2880
|
|
|
Previous Revision Date: 09-20-2005
Latest Revision Date: 12-14-2005
|
|
 |
 |
|
|
|
